Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items at this level: 153.

A

Abdul-Al, Mohamed and Kyeremeh, George Kumi and Saeinasab, Morvarid and Heidari Keshel, Saeed and Sefat, Farshid (2021) Stem Cell Niche Microenvironment: Review. Bioengineering, 8 (8). p. 108. ISSN 2306-5354

Adamou, Mamane and Alkassoum, Nabil and Foulani, André and Maiga, Amadou Seidou (2019) Comparative Study of Linear and Non-Linear Controls of Three-Phase Shunt Active Filters for Improving the Quality of Electrical Energy. Energy and Power Engineering, 11 (03). pp. 149-166. ISSN 1949-243X

Ahmed, Nuzhat and Zhu, Yong (2020) Early Detection of Atrial Fibrillation Based on ECG Signals. Bioengineering, 7 (1). p. 16. ISSN 2306-5354

Ahmed, Rizwan and Firrone, Christian Maria and Zucca, Stefano (2021) Design and Calibration of a Tri-Directional Contact Force Measurement System. Applied Sciences, 11 (2). p. 877. ISSN 2076-3417

Alkabbani, Hanin and Ahmadian, Ali and Zhu, Qinqin and Elkamel, Ali (2021) Machine Learning and Metaheuristic Methods for Renewable Power Forecasting: A Recent Review. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Alotaibi, N. F. and Alsolami, M. A. and Moustafa, Shaima M. N. and Darwish, Nawaf Bin and Nassar, A. M. and Hua, Ming (2022) A Novel Antifouling RO Polyamide/Myrrh Membrane for Waste Water Purification. Adsorption Science & Technology, 2022. pp. 1-10. ISSN 0263-6174

B

Babaremu, Kunle and Jen, Tien-Chen and Oladijo, Oluseyi and Akinlabi, Esther (2023) Surface morphological characterization of rf-magnetron sputtering developed inconel coated titanium. Engineering Solid Mechanics, 12 (1). pp. 27-32. ISSN 22918744

Bakar, Abu and Ke, Li and Liu, Haobo and Xu, Ziqi and Wen, Dongsheng (2021) Design of Low Altitude Long Endurance Solar-Powered UAV Using Genetic Algorithm. Aerospace, 8 (8). p. 228. ISSN 2226-4310

Bhattarai, Shankar and Go, Ji-Seong and Kim, Hongrae and Oh, Hyun-Ung (2021) Development of a Novel Deployable Solar Panel and Mechanism for 6U CubeSat of STEP Cube Lab-II. Aerospace, 8 (3). p. 64. ISSN 2226-4310

Birrenbach, Oliver and Faust, Frederik and Ebrahimi, Mehrdad and Fan, Rong and Czermak, Peter (2021) Recovery and Purification of Protein Aggregates From Cell Lysates Using Ceramic Membranes: Fouling Analysis and Modeling of Ultrafiltration. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Bjerk, Thiago R. and Severino, Patricia and Jain, Sona and Marques, Conrado and Silva, Amélia M. and Pashirova, Tatiana and Souto, Eliana B. (2021) Biosurfactants: Properties and Applications in Drug Delivery, Biotechnology and Ecotoxicology. Bioengineering, 8 (8). p. 115. ISSN 2306-5354

BouNehme Sawaya, Christelle and Harb, Moustapha (2021) Considering the Prospect of Utilizing Anaerobic Membrane Biofouling Layers Advantageously for the Removal of Emerging Contaminants. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Breńkacz, Łukasz and Bagiński, Paweł and Żywica, Grzegorz (2021) Experimental Research on Foil Vibrations in a Gas Foil Bearing Carried Out Using an Ultra-High-Speed Camera. Applied Sciences, 11 (2). p. 878. ISSN 2076-3417

Bucchioni, Giordana and Innocenti, Mario (2021) Rendezvous in Cis-Lunar Space near Rectilinear Halo Orbit: Dynamics and Control Issues. Aerospace, 8 (3). p. 68. ISSN 2226-4310

C

Cacopardo, Ludovica and Ahluwalia, Arti (2021) Engineering and Monitoring 3D Cell Constructs with Time-Evolving Viscoelasticity for the Study of Liver Fibrosis In Vitro. Bioengineering, 8 (8). p. 106. ISSN 2306-5354

Casalino, Lorenzo and Masseni, Filippo and Pastrone, Dario (2021) Hybrid Rocket Engine Design Optimization at Politecnico di Torino: A Review. Aerospace, 8 (8). p. 226. ISSN 2226-4310

Cascino, Alessio and Amedei, Andrea and Meli, Enrico and Rindi, Andrea (2024) Development, Designing and Testing of a New Test Rig for Studying Innovative Polycrystalline Diamond Bearings. Eng, 5 (3). pp. 1615-1640. ISSN 2673-4117

Catapano, Gerardo and Unger, Juliane K. and Zanetti, Elisabetta M. and Fragomeni, Gionata and Gerlach, Jörg C. (2021) Kinetic Analysis of Lidocaine Elimination by Pig Liver Cells Cultured in 3D Multi-Compartment Hollow Fiber Membrane Network Perfusion Bioreactors. Bioengineering, 8 (8). p. 104. ISSN 2306-5354

Chang, Hsuan-Ting and Lin, Tzu-Yao and Chuang, Chih-Hao and Chen, Chien-Yu and Ho, Chian C. and Chang, Chuan-Yu (2021) Separation of Two-Dimensional Mixed Circular Fringe Patterns Based on Spectral Projection Property in Fractional Fourier Transform Domain. Applied Sciences, 11 (2). p. 859. ISSN 2076-3417

Chen, Huan and Wan, Kun and Zheng, Fangjuan and Zhang, Zhuo and Zhang, Hongyu and Zhang, Yayun and Long, Donghui (2021) Recent Advances in Photocatalytic Transformation of Carbohydrates Into Valuable Platform Chemicals. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Chen, Song and Zhou, Yi and Song, Lu and Yang, Yanli and He, Fuming and Chen, Qianming and Cheng, Xi and Rehman, Rabia (2022) Metagenomics Analysis of Microbial Species and Antibiotic Resistance Genes (ARGs) in Untreated Wastewater from Different Types of Hospitals in Hangzhou. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Cheng, Yu-Ya and Chen, Yan-Ming and Yeh, Wen-Chao and Chang, Yung-Chun (2021) Valence and Arousal-Infused Bi-Directional LSTM for Sentiment Analysis of Government Social Media Management. Applied Sciences, 11 (2). p. 880. ISSN 2076-3417

Chime, Frankly Chukwudi and Ohale, Paschal Enyinnaya and Onu, Chijioke Elijah and Ohale, Nonye Jennifer (2023) Application of ANN and RSM Techniques in Optimal Parameter Evaluation for Turbidity Removal from Abattoir Effluent using Valorized Chicken Bone Coagulant. Journal of Engineering Research and Reports, 24 (1). pp. 30-48. ISSN 2582-2926

Comunale, Giulia and Di Micco, Luigi and Boso, Daniela Paola and Susin, Francesca Maria and Peruzzo, Paolo (2021) Numerical Models Can Assist Choice of an Aortic Phantom for In Vitro Testing. Bioengineering, 8 (8). p. 101. ISSN 2306-5354

D

Dabhade, Ruchira Kurve (2021) Studies on Magic Mirror Using Augmented Reality: Review. In: New Approaches in Engineering Research Vol. 3. B P International, pp. 134-141. ISBN 978-93-91312-89-3

Dai, Shixiang and Korth, Benjamin and Vogt, Carsten and Harnisch, Falk (2021) Microbial Electrochemical Oxidation of Anaerobic Digestion Effluent From Treating HTC Process Water. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Dawodu, Praise Onimisi and Apata, A. C. and Imoh, U. U. and Akintunde, Femi (2023) Comparative Study of Cement Replacement with Waste Plastic in Interlocking Paving Stone for Highway Construction in Nigeria. Journal of Engineering Research and Reports, 24 (1). pp. 20-29. ISSN 2582-2926

De Buck, Viviane and Nimmegeers, Philippe and Hashem, Ihab and Muñoz López, Carlos André and Van Impe, Jan (2021) Exploiting Trade-Off Criteria to Improve the Efficiency of Genetic Multi-Objective Optimisation Algorithms. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

De Leon, Sorel E. and Cleuren, Lana and Oo, Zay Yar and Stoddart, Paul R. and McArthur, Sally L. (2021) Extending In-Plane Impedance Measurements from 2D to 3D Cultures: Design Considerations. Bioengineering, 8 (1). p. 11. ISSN 2306-5354

Deivasigamani, D. and Kumar, R. Vinoth (2022) Design and Deployment of Secured Cloud Assist IIoT - SCADA System for Real Time Parameter Monitoring and Control in Process Control Applications. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 90-98. ISBN 978-93-5547-492-6

Di Serio, Martino and Russo, Vincenzo and Santacesaria, Elio and Tesser, Riccardo (2021) The Evolution of the Fed Batch Ethoxylation Reactors to Produce the Non-Ionic Surfactants. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Dinesh, K. R. and Hatti, Gururaj (2022) Investigating the Effect of TiO2, CaCO3, and Al2O3 on Mechanical Properties of LDPE Polymer Composites Fabricated by Injection Moulding Technique. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 118-126. ISBN 978-93-5547-492-6

Dong, Yuanshuai and Zhang, Hong and Hou, Yun and Qian, Zhenyu and Tian, Jialei and Guo, Meng (2021) Study on Mechanical Properties of Recycled Mixture with High Content of Iron Tailings Sand. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

D’ambrosio, Sergio and Alfano, Alberto and Cimini, Donatella (2021) Production of Succinic Acid From Basfia succiniciproducens. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

E

Eddine, Lakache Houssem and Abdelghani, May and Riad, Badji (2023) Rotary Friction Welding Parameters Effects upon Mechanical Properties and Microstructure of AA2024 Weld Joints. Engineering Solid Mechanics, 11 (3). pp. 291-298. ISSN 22918744

Epifanov, Anton (2021) Complexity Estimation of Automata Models with Use the Discrete RIV-functions. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 46-52. ISBN 978-93-91882-81-5

F

Fardi, H. (2021) Study on Design and Analysis of Ga2O3 Power MOSFETs with Source-field-plated. In: New Approaches in Engineering Research Vol. 16. B P International, pp. 30-36. ISBN 978-93-5547-070-6

G

Galili, Uri and Stone, Kevin R. (2021) In Situ “Humanization” of Porcine Bioprostheses: Demonstration of Tendon Bioprostheses Conversion into Human ACL and Possible Implications for Heart Valve Bioprostheses. Bioengineering, 8 (1). p. 10. ISSN 2306-5354

Gallifuoco, Alberto and Papa, Alessandro Antonio and Taglieri, Luca (2021) Biomass Hydrothermal Carbonization: Markov-Chain Monte Carlo Data Analysis and Modeling. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Ghedini, Elena and Pizzolato, Marco and Longo, Lilia and Menegazzo, Federica and Zanardo, Danny and Signoretto, Michela (2021) Which Are the Main Surface Disinfection Approaches at the Time of SARS-CoV-2? Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Gnanasekaran, S. and Chelladurai, Samson Jerold Samuel and Ramakrishnan, T. and Sivananthan, S and Padmanaban, G. and Arthanari, Ramesh and Balasubramanian, V. and De Bonis, Angela (2021) Optimizing the Characteristics of the Laser Hardfacing Process Parameters to Maximize the Wear Resistance of Ni-Based Hard-Faced Deposits Using the RSM Technique. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Gollob, Samuel Dutra and Mendoza, Mijaíl Jaén and Koo, Bon Ho Brandon and Centeno, Esteban and Vela, Emir A. and Roche, Ellen T. (2023) A length-adjustable vacuum-powered artificial muscle for wearable physiotherapy assistance in infants. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Gontran, Emilie and Loarca, Lorena and El Kassis, Cyrille and Bouzhir, Latifa and Ayollo, Dmitry and Mazari-Arrighi, Elsa and Fuchs, Alexandra and Dupuis-Williams, Pascale (2021) Self-Organogenesis from 2D Micropatterns to 3D Biomimetic Biliary Trees. Bioengineering, 8 (8). p. 112. ISSN 2306-5354

Grace, Ejims (2023) Green Growth and Sustainable Development in Nigeria. Journal of Engineering Research and Reports, 25 (8). pp. 187-196. ISSN 2582-2926

Gu, Hao and Wang, Tengfei and Zhu, Yantao and Wang, Cheng and Yang, Dashan and Huang, Lixian (2021) A Completion Method for Missing Concrete Dam Deformation Monitoring Data Pieces. Applied Sciences, 11 (1). p. 463. ISSN 2076-3417

Gugulothu, Bhiksha and Satheesh Kumar, P. S. and Srinivas, Bathula and Ramakrishna, Alapati and Vijayakumar, S. and Vijayan, V. (2021) Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18. Advances in Materials Science and Engineering, 2021. pp. 1-6. ISSN 1687-8434

Guillard, Anthony and Thevenon, Paul and Milner, Carl (2023) Using convolutional neural networks to detect GNSS multipath. Frontiers in Robotics and AI, 10. ISSN 2296-9144

H

Hausjell, Johanna and Kutscha, Regina and Gesson, Jeannine D. and Reinisch, Daniela and Spadiut, Oliver (2020) The Effects of Lactose Induction on a Plasmid-Free E. coli T7 Expression System. Bioengineering, 7 (1). p. 8. ISSN 2306-5354

Hopkins, Sean P. and Frost, Megan C. (2020) S-Nitroso-N-Acetyl-D-Penicillamine Modified Hyperbranched Polyamidoamine for High-Capacity Nitric Oxide Storage and Release. Bioengineering, 7 (1). p. 9. ISSN 2306-5354

Hopping, Ethan P. and Huang, Wensheng and Xu, Kunning G. (2021) Small Hall Effect Thruster with 3D Printed Discharge Channel: Design and Thrust Measurements. Aerospace, 8 (8). p. 227. ISSN 2226-4310

Hu, Feng and Li, Zhiqing and Tian, Yifan and Hu, Ruilin (2021) Failure Patterns and Morphological Soil–Rock Interface Characteristics of Frozen Soil–Rock Mixtures under Compression and Tension. Applied Sciences, 11 (1). p. 461. ISSN 2076-3417

Hussein, Nancy M. S. and Meade, Josie L. and Pandit, Hemant and Jones, Elena and El-Gendy, Reem (2021) The Effect of Diabetes Mellitus on IGF Axis and Stem Cell Mediated Regeneration of the Periodontium. Bioengineering, 8 (12). p. 202. ISSN 2306-5354

I

Intan Shafinas Muhammad, Noor and A. Rosentrater, Kurt (2020) Economic Assessment of Bioethanol Recovery Using Membrane Distillation for Food Waste Fermentation. Bioengineering, 7 (1). p. 15. ISSN 2306-5354

Iskandar, Lilis and DiSilvio, Lucy and Acheson, Jonathan and Deb, Sanjukta (2021) Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery. Bioengineering, 8 (8). p. 107. ISSN 2306-5354

Iwok, Unwana Ubong and Udofia, Kingsley Monday and Obot, Akaninyene Bernard and Udofia, Kufre Michael and Michael, Unyime Anietie and Kingsley, Akpabio Itoro (2023) Evaluation of Machine Learning Algorithms using Combined Feature Extraction Techniques for Speaker Identification. Journal of Engineering Research and Reports, 25 (8). pp. 197-216. ISSN 2582-2926

J

Janardhan, N. and Krishna, M. V. S. Murali (2022) Performance of a Semi Adiabatic Diesel Engine Fuelled with Jatropha Bio-diesel. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 134-149. ISBN 978-93-5547-492-6

Jeske, Jan Torsten and Gallert, Claudia (2021) Mechanisms Driving Microbial Community Composition in Anaerobic Co-Digestion of Waste-Activated Sewage Sludge. Bioengineering, 8 (12). p. 197. ISSN 2306-5354

Jeyaprabha, T. J. and Sumathi, G. and Sneha, D. and Reshma, C. and Nykhil, K. S. Sai (2021) Wi-Fi Based Solar Plant Monitoring System. In: New Approaches in Engineering Research Vol. 3. B P International, pp. 116-133. ISBN 978-93-91312-89-3

Jiang, Hong and Wang, Chengchong and Li, Zhongxing and Liu, Chenlai (2021) Hybrid Model Predictive Control of Semiactive Suspension in Electric Vehicle with Hub-Motor. Applied Sciences, 11 (1). p. 382. ISSN 2076-3417

Jiang, Yingjun and Fan, Jiangtao and Lv, Pengyu and Yuan, Kejia and Yi, Yong and Tian, Tian and Bai, Chenfan and Tang, Shengwen (2021) Development of the Fog Seal Layer Characterized by Durability in Terms of Skid Resistance. Advances in Materials Science and Engineering, 2021. pp. 1-18. ISSN 1687-8434

Jianghua, Han (2020) Idioms, Cognition and Culture: The Meaning Construction of Chinese New Idioms Based on Blending Model. B P International. ISBN 978-93-90149-75-9

K

Kanamaru, Manami and Tan, Phan Xuan and Kamioka, Eiji (2021) Simulation-Based Clarification of Appropriate Factors for Presenting Phosphene in Two Directions Avoiding Electrical Interference. Bioengineering, 8 (8). p. 111. ISSN 2306-5354

Kandasamy, S. and Ibrahim, S. Syed and Gowdhamramkarthik, P. and Pannirselvam, N. and Rajaram, M. (2022) Strength and Surface Quality Properties of SCC Made Using Controlled Permeable Formwork Liner. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 103-118. ISBN 978-93-5547-914-3

Karaasrlan, Ahmet and Elagib, Rahmi (2022) Implementation and Stabilization of a Quadcopter Using Arduino and the Combination of LQR and SMC Methods. Journal of Engineering Research and Reports, 23 (7). pp. 42-58. ISSN 2582-2926

Kartmann, Rainer and Asfour, Tamim (2023) Interactive and incremental learning of spatial object relations from human demonstrations. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Koteleva, Natalia and Frenkel, Ilia (2021) Digital Processing of Seismic Data from Open-Pit Mining Blasts. Applied Sciences, 11 (1). p. 383. ISSN 2076-3417

L

Le, Quang Dan and Kang, Hee-Jun (2021) Implementation of Fault-Tolerant Control for a Robot Manipulator Based on Synchronous Sliding Mode Control: An Advanced Study. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 63-82. ISBN 978-93-91882-81-5

Lee, Jeong Hwan and Ge, Jun Cong and Song, Jun Hee (2021) Study on Burr Formation and Tool Wear in Drilling CFRP and Its Hybrid Composites. Applied Sciences, 11 (1). p. 384. ISSN 2076-3417

Leslie, Mathew N. and Chou, Joshua and Young, Paul M. and Traini, Daniela and Bradbury, Peta and Ong, Hui Xin (2021) How Do Mechanics Guide Fibroblast Activity? Complex Disruptions during Emphysema Shape Cellular Responses and Limit Research. Bioengineering, 8 (8). p. 110. ISSN 2306-5354

Li, Can and Grossmann, Ignacio E. (2021) A Review of Stochastic Programming Methods for Optimization of Process Systems Under Uncertainty. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Li, Guiliang and Liu, Yang and Shen, Yi and Fang, Qile and Liu, Fu (2021) Bimetallic Coordination in Two-Dimensional Metal–Organic Framework Nanosheets Enables Highly Efficient Removal of Heavy Metal Lead (II). Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Li, Sheying and Carvalho, Ana P. S. G. de and Schäfer, Andrea I. and Richards, Bryce S. (2021) Renewable Energy Powered Membrane Technology: Electrical Energy Storage Options for a Photovoltaic-Powered Brackish Water Desalination System. Applied Sciences, 11 (2). p. 856. ISSN 2076-3417

Lin, Yi (2021) Spoken Instruction Understanding in Air Traffic Control: Challenge, Technique, and Application. Aerospace, 8 (3). p. 65. ISSN 2226-4310

Liu, Lumei and Dharmadhikari, Sayali and Pouliot, Robert A. and Li, Michael M. and Minneci, Peter M. and Tan, Zhenghong and Shontz, Kimberly and Johnson, Jed and Reynolds, Susan D. and Breuer, Christopher K. and Weiss, Daniel J. and Chiang, Tendy (2021) Modulation of Synthetic Tracheal Grafts with Extracellular Matrix Coatings. Bioengineering, 8 (8). p. 116. ISSN 2306-5354

Liu, Lumei and Stephens, Brooke and Bergman, Maxwell and May, Anne and Chiang, Tendy (2021) Role of Collagen in Airway Mechanics. Bioengineering, 8 (1). p. 13. ISSN 2306-5354

Lohtander, Tia and Grande, Rafael and Österberg, Monika and Laaksonen, Päivi and Arola, Suvi (2021) Bioactive Films from Willow Bark Extract and Nanocellulose Double Network Hydrogels. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Lukosek, Marek and Emmons-Burzyńska, Magdalena and Alejski, Krzysztof and Szwach, Iwona (2021) Physicochemical Characterization of Ethoxylation Products of Fatty Acid Esters. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

M

Ma, Xiaoyi and Hu, Xiaowei and Schweig, Stephan and Pragalathan, Jenitta and Schramm, Dieter (2021) A Vehicle Guidance Model with a Close-to-Reality Driver Model and Different Levels of Vehicle Automation. Applied Sciences, 11 (1). p. 380. ISSN 2076-3417

Madondo, Nhlanganiso Ivan and Tetteh, Emmanuel Kweinor and Rathilal, Sudesh and Bakare, Babatunde Femi (2021) Synergistic Effect of Magnetite and Bioelectrochemical Systems on Anaerobic Digestion. Bioengineering, 8 (12). p. 198. ISSN 2306-5354

Mahesh, V. (2022) An Overview on Near Field Communication (NFC) and Blockchain Technology. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 127-133. ISBN 978-93-5547-492-6

Mahmud, Md. Saif and Islam, Md. Ashikul and Rahman, Md. Maruf and Chakraborty, Debashon and Kabir, Shaharier and Shufian, Abu and Sheikh, Protik Parvez (2024) Enhancing Industrial Control System Security: An Isolation Forest-based Anomaly Detection Model for Mitigating Cyber Threats. Journal of Engineering Research and Reports, 26 (3). pp. 161-173. ISSN 2582-2926

Majdan, Radoslav and Abrahám, Rudolf and Tkáč, Zdenko and Drlička, Róbert and Matejková, Eva and Kollárová, Katarína and Mareček, Jan (2021) Static Lateral Stability of Tractor with Rear Wheel Ballast Weights: Comparison of ISO 16231-2 (2015) with Experimental Data Regarding Tyre Deformation. Applied Sciences, 11 (1). p. 381. ISSN 2076-3417

Matthew, Osagie and Nieh, Sen (2019) Effects of ORC Working Fluids on Combined Cycle Integrated with SOFC and ORC for Stationary Power Generation. Energy and Power Engineering, 11 (04). pp. 167-185. ISSN 1949-243X

McClure, Michael J. and Olson, Lucas C. and Cohen, David J. and Huang, Yen Chen and Zhang, Shirley and Nguyen, Tri and Boyan, Barbara D. and Schwartz, Zvi (2021) RNU (Foxn1RNU-Nude) Rats Demonstrate an Improved Ability to Regenerate Muscle in a Volumetric Muscle Injury Compared to Sprague Dawley Rats. Bioengineering, 8 (1). p. 12. ISSN 2306-5354

Mejri, Chadha and Oueslati, Walid and Amara, Abdesslem Ben Haj and Du, Huihui (2022) Structural Alteration, Hydration Stability, Heavy Metal Removal Efficiency, and Montmorillonite Porosity Fate by Coupling the Soil Solution pH and a Thermal Gradient. Adsorption Science & Technology, 2022. pp. 1-28. ISSN 0263-6174

Mohammed, Othman and Onuoha, Wopara Fidelis and Emenike, Wami (2024) Evaluation of the Suitability and Effectiveness of Carboxylmethyl Cellulose (CMC) from Rice Husks and Saw Dust as Replacement for Conventional Hydroxy Ethyl Cellulose (HEC) as Additive for Cement Slurry Design. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 88-101. ISBN 978-81-974068-0-5

Muchtar, Taufik and Utami, Atikah Tri Budi and Lutfi, Lutfi and Gani, Hamdan (2024) Integrated System for Accurate Electrical Measurement Monitoring. Journal of Engineering Research and Reports, 26 (2). pp. 51-59. ISSN 2582-2926

Murab, Sumit and Hawk, Teresa and Snyder, Alexander and Herold, Sydney and Totapally, Meghana and Whitlock, Patrick W. (2021) Tissue Engineering Strategies for Treating Avascular Necrosis of the Femoral Head. Bioengineering, 8 (12). p. 200. ISSN 2306-5354

N

Nagpal, Shubhrata (2021) Parametric Analysis and Photo Elastic Experiment of Stress Concentration Factor and Its Mitigation in Rectangular Plate with Opposite V- notches Subjected to In-Plane Loading. In: New Approaches in Engineering Research Vol. 16. B P International, pp. 44-60. ISBN 978-93-5547-070-6

Ndamati, Ikechi T. and Olayemi, Olaoluwa S. and Madu, Afam D. (2024) Demonstration of Interferometric Properties of Unbalanced Mach-Zehnder Interferometer. Journal of Engineering Research and Reports, 26 (2). pp. 145-155. ISSN 2582-2926

O

Olowokere, J. A. and Akpan, U. G. and Okafor, J. O. and Auta, S. M. (2022) Advances and Development in Hybrid Polymer Composite: The Way Forward. Journal of Engineering Research and Reports, 23 (12). pp. 281-295. ISSN 2582-2926

Olukaejire, SJ and Ifiora, CC and Osaro, PA and Osuji, LC and Hart, AI (2024) Diagnosis of Crude Oil Impacted Soil in Eleme Local Government Area, Rivers State, Nigeria. Journal of Engineering Research and Reports, 26 (5). pp. 324-335. ISSN 2582-2926

Osório, Luana A. and Silva, Elisabete and Mackay, Ruth E. (2021) A Review of Biomaterials and Scaffold Fabrication for Organ-on-a-Chip (OOAC) Systems. Bioengineering, 8 (8). p. 113. ISSN 2306-5354

Otevřelová, Petra and Brodská, Barbora (2021) Chemotherapy-Induced Survivin Regulation in Acute Myeloid Leukemia Cells. Applied Sciences, 11 (1). p. 460. ISSN 2076-3417

P

Pandey, Subash and Neupane, Shova and Gupta, Dipak Kumar and Das, Anju Kumari and Karki, Nabin and Singh, Sanjay and Yadav, Ram Jeewan and Yadav, Amar Prasad (2021) Ce-Doped PANI/Fe3O4 Nanocomposites: Electrode Materials for Supercapattery. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Papadaki, Maria I. and Mendoza-Castillo, Didilia Ileana and Reynel-Avila, Hilda Elizabeth and Bonilla-Petriciolet, Adrian and Georgopoulos, Stavros (2021) Nut Shells as Adsorbents of Pollutants: Research and Perspectives. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Papadopoulos, Athanasios I. and Kyriakides, Alexios-Spyridon and Seferlis, Panos and Hassan, Ibrahim (2021) Integrated Design of Working Fluid Mixtures and Absorption Refrigeration Cycles. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Pappas, Iosif and Kenefake, Dustin and Burnak, Baris and Avraamidou, Styliani and Ganesh, Hari S. and Katz, Justin and Diangelakis, Nikolaos A. and Pistikopoulos, Efstratios N. (2021) Multiparametric Programming in Process Systems Engineering: Recent Developments and Path Forward. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Parwal, Arvind and Fregelius, Martin and Silva, Dalmo Cardosa and Potapenko, Tatiana and Hjalmarsson, Johannes and Kelly, James and Temiz, Irina and de Oliveira, Janaina Goncalves and Boström, Cecilia and Leijon, Mats (2019) Virtual Synchronous Generator Based Current Synchronous Detection Scheme for a Virtual Inertia Emulation in SmartGrids. Energy and Power Engineering, 11 (03). pp. 99-131. ISSN 1949-243X

Pazos, Florencio (2021) Prediction of Protein Sites and Physicochemical Properties Related to Functional Specificity. Bioengineering, 8 (12). p. 201. ISSN 2306-5354

Pinheiro, Guilherme J. C. and Campilho, Raul D. S. G. (2024) Fracture Criteria Assessment in Adhesive Joint Modelling by XFEM. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 102-114. ISBN 978-81-974068-0-5

Prabhahar, M. and Gomathi, K. and Venkatesh, R. and Stalany, V. Mago and Vijayan, D. S. and Sassykova, Larissa R. and Sendilvelan, S. and Priya, V. Shanmuga and Jijina, G. O. and Selvaraj, Rabin and Alsohaimi, Ibrahim H. (2022) Isothermic and Kinetic Study on Removal of Methylene Blue Dye Using Anisomeles malabarica Silver Nanoparticles: An Efficient Adsorbent to Purify Dye-Contaminated Wastewater. Adsorption Science & Technology, 2022. pp. 1-7. ISSN 0263-6174

Pradas, Francisco and de la Torre, Ana and Carrasco, Luis and Muñoz, Diego and Courel-Ibáñez, Javier and González-Jurado, José Antonio (2021) Anthropometric Profiles in Table Tennis Players: Analysis of Sex, Age, and Ranking. Applied Sciences, 11 (2). p. 876. ISSN 2076-3417

Psarommatis, Foivos and Martiriggiano, Giacomo and Zheng, Xiaochen and Kiritsis, Dimitris (2021) A Generic Methodology for Calculating Rescheduling Time for Multiple Unexpected Events in the Era of Zero Defect Manufacturing. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Pérez-Méndez, Mario Alberto and Jiménez-García, Gladys and Huirache-Acuña, Rafael and Maya-Yescas, Rafael (2021) Estimation of Reaction Rates of Transesterification Pathways. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Pölzlbauer, Patrick and Kümmel, Andreas and Desvigne, Damien and Breitsamter, Christian (2021) Numerical Investigation of an Optimized Rotor Head Fairing for the RACER Compound Helicopter in Cruise Flight. Aerospace, 8 (3). p. 66. ISSN 2226-4310

R

Rahman, Ataur and Ihsan, Sany Izan and Ismail, Ahmed Faris (2021) Techno-Economic Analysis of Retrofitted Electric Coaster Introduction in University Campus. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 91-109. ISBN 978-93-91882-81-5

Raju, E. Madhusudan and Krishna, L. Siva Rama and Mouli, Y. Sharath Chandra and Rao, V. Nageswara (2021) Study on the Effect of Link Flexibility on Tip Position of a Single Link Robotic Arm. In: New Approaches in Engineering Research Vol. 3. B P International, pp. 142-151. ISBN 978-93-91312-89-3

Rama, Kovur (2022) Automated Tele-monitoring System. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 119-133. ISBN 978-93-5547-914-3

Raman, Adhiti and Walker, Ian and Krovi, Venkat and Schmid, Matthias (2023) Cable failure tolerant control and planning in a planar reconfigurable cable driven parallel robot. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Ramirez-Malule, Howard and López-Agudelo, Víctor and Gómez-Ríos, David and Ochoa, Silvia and Ríos-Estepa, Rigoberto and Junne, Stefan and Neubauer, Peter (2021) TCA Cycle and Its Relationship with Clavulanic Acid Production: A Further Interpretation by Using a Reduced Genome-Scale Metabolic Model of Streptomyces clavuligerus. Bioengineering, 8 (8). p. 103. ISSN 2306-5354

Ramos-Rodriguez, David H. and MacNeil, Sheila and Claeyssens, Frederik and Ortega Asencio, Ilida (2021) Delivery of Bioactive Compounds to Improve Skin Cell Responses on Microfabricated Electrospun Microenvironments. Bioengineering, 8 (8). p. 105. ISSN 2306-5354

Rao, Tekuru Chandra Sekhar and Kanagala, Sateesh Kumar (2021) Detection of Copy Move Forgery Using a Hybrid Algorithm. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 83-90. ISBN 978-93-91882-81-5

Rayimjon, Aliev and Gulomjonovich, Ikromov Rustamjon and Alisherovna, Alinazarova Mahfuza (2019) Temperature Stimulation of Effective Value of Density of the Current of Semiconductor Solar Cells. Energy and Power Engineering, 11 (02). pp. 92-97. ISSN 1949-243X

Razon, Luis F. and Valera-Medina, Agustin (2021) A Comparative Environmental Life Cycle Assessment of the Combustion of Ammonia/Methane Fuels in a Tangential Swirl Burner. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Rees, David W. A. and Alsheikh, Abdelraouf M. Sami (2024) The Effects of the Longitudinal Axis of Loading upon Bending, Shear and Torsion of a Thin-Walled Cantilever Channel Beam. World Journal of Mechanics, 14 (05). pp. 73-96. ISSN 2160-049X

Rishi, Aniket M. and Rozati, Seyed Alireza and Trybus, Carole and Kandlikar, Satish G. and Gupta, Anju (2021) Investigation of Structure-Property-Boiling Enhancement Mechanisms of Copper/Graphene Nanoplatelets Coatings. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Rodriguez, Ricardo and Lewis, Winston G. (2021) A Theoretical Model for RF Propagation within Rectangular Enclosures Using Waveguide Concepts. In: New Approaches in Engineering Research Vol. 16. B P International, pp. 37-43. ISBN 978-93-5547-070-6

Rodríguez, Alejandra and Gea, Teresa and Font, Xavier (2021) Sophorolipids Production from Oil Cake by Solid-State Fermentation. Inventory for Economic and Environmental Assessment. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Rossi, Marta M. and Dell’Armi, Edoardo and Lorini, Laura and Amanat, Neda and Zeppilli, Marco and Villano, Marianna and Petrangeli Papini, Marco (2021) Combined Strategies to Prompt the Biological Reduction of Chlorinated Aliphatic Hydrocarbons: New Sustainable Options for Bioremediation Application. Bioengineering, 8 (8). p. 109. ISSN 2306-5354

S

Sai, G Mohan and Noel, B Olive and Kiran, B L Sai and Krishna, B Karthik and Bhupal, M Ram (2024) Digital Image Authenticity Assessment Using Deep Learning. Journal of Engineering Research and Reports, 26 (5). pp. 283-293. ISSN 2582-2926

Santos, João C.M. and Campilho, Raul D.S.G. (2024) Maritime Applications of Adhesively-Bonded Joints. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 75-87. ISBN 978-81-974068-0-5

Schio, Aline Lucchesi and Michels, Alexandre Fassini and Fongaro, Gislaine and Figueroa, Carlos Alejandro (2021) Trends in the Antiviral Chemical Activity of Material Surfaces Associated With the SARS-CoV-2 Outbreak. Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Sekiguchi, Tatsuya and Hamada, Hiroyuki and Okamoto, Masahiro (2021) WinBEST-KIT: Biochemical Reaction Simulator for Analyzing Multi-Layered Metabolic Pathways. Bioengineering, 8 (8). p. 114. ISSN 2306-5354

Shanto, Shakib Sadat and Rahman, Mushfiqur and Oasik, Jaber Md. and Hossain, Hamim (2023) Smart Greenhouse Monitoring System Using Blynk IoT App. Journal of Engineering Research and Reports, 25 (2). pp. 94-107. ISSN 2582-2926

Shishlyannikov, Dmitriy and Zvonarev, Ivan (2021) Investigation of the Destruction Process of Potash Ore with a Single Cutter Using Promising Cross Cutting Pattern. Applied Sciences, 11 (1). p. 464. ISSN 2076-3417 (In Press)

Soares, A.R.F. and Campilho, R.D.S.G. (2024) Development of a Test Set Up for Characterization of Mixed-mode Fracture Toughness of Structural Adhesives. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 115-131. ISBN 978-81-974068-0-5

Son, Keunbada and Lee, Kyu-Bok (2021) Marginal and Internal Fit of Ceramic Prostheses Fabricated from Different Chairside CAD/CAM Systems: An In Vitro Study. Applied Sciences, 11 (2). p. 857. ISSN 2076-3417

Sowmyayani, S. and Murugan, V. (2021) Determination of Segmentation Based H.264/AVC Using Octagon and Square Search Pattern in Adaptive Group of Pictures Mode. In: New Approaches in Engineering Research Vol. 13. B P International, pp. 53-62. ISBN 978-93-91882-81-5

Srinivas, G. (2021) Study of FPGA Based Vector Control of Induction Motor. In: New Approaches in Engineering Research Vol. 16. B P International, pp. 61-71. ISBN 978-93-5547-070-6

Swaid, Majed and Marks, Tobias and Linke, Florian and Gollnick, Volker (2021) Fuel Planning Strategies Considering Operational Uncertainties of Aerodynamic Formation Flight. Aerospace, 8 (3). p. 67. ISSN 2226-4310

T

Terzini, Mara and Pietro, Andrea Di and Aprato, Alessandro and Artiaco, Stefano and Massè, Alessandro and Bignardi, Cristina (2021) Are Suprapectineal Quadrilateral Surface Buttressing Plates Performances Superior to Traditional Fixation? A Finite Element Analysis. Applied Sciences, 11 (2). p. 858. ISSN 2076-3417

Tiwari, H. L. and Hora, M. S. (2021) Development of Stilling Basin Model at Zero Depth of Pipe Outlet to Basin Floor: An Advanced Research. In: New Approaches in Engineering Research Vol. 16. B P International, pp. 21-29. ISBN 978-93-5547-070-6

Tochukwu, Mmeka Paschal and Emeka, Ugwu Stephen and Chisomnazu, Iwenofu Alvin (2023) Experimental Study of Self-Compacting Concrete Using Plantain Leaf Ash and Polycarboxylate Ether Solution as Superplasticizer. Journal of Engineering Research and Reports, 24 (4). pp. 35-43. ISSN 2582-2926

Toderas, Mihaela (2022) Determination of Mining Risks at Exploitation in Rosia Poieni Open Pit Mine, Romania. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 66-87. ISBN 978-93-5547-914-3

Toderas, Mihaela (2022) Safety Factor of the Open-pit Bench from Rosia Poieni Quarry, Romania. In: Techniques and Innovation in Engineering Research Vol. 3. B P International, pp. 88-102. ISBN 978-93-5547-914-3

Tsangouri, Eleni and Ismail, Hasan and De Munck, Matthias and Aggelis, Dimitrios G. and Tysmans, Tine (2021) Reveal of Internal, Early-Load Interfacial Debonding on Cement Textile-Reinforced Sandwich Insulated Panels. Applied Sciences, 11 (2). p. 879. ISSN 2076-3417

Tushar, Bezon Dey and Riyad, Tarifuzzaman and Yazdi, Quazi Reshoan and Islam, Jariatun and Bhuyan, Muhibul Haque (2024) Design, Simulation, Building, and Testing of a Microcontroller-Based Automatic Drowsiness Detection, Vehicle Braking, and Alert System. Journal of Engineering Research and Reports, 26 (3). pp. 208-223. ISSN 2582-2926

V

Vicevic, Marija and Novakovic, Katarina and Boodhoo, Kamelia (2021) Free-Radical Polymerization of Styrene: Kinetic Study in a Spinning Disc Reactor (SDR). Frontiers in Chemical Engineering, 3. ISSN 2673-2718

Violano, Guido and Chateauminois, Antoine and Afferrante, Luciano (2021) A JKR-Like Solution for Viscoelastic Adhesive Contacts. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

W

Wolff, Jonas O. and von Byern, Janek and Piorkowski, Dakota and Fang, Jian and Wang, Xungai and Adler, Lewis and Thomas, Donald S. and Hook, James M. and Blamires, Sean J. (2021) Adhesive Droplets of Glowworm Snares (Keroplatidae: Arachnocampa spp.) Are a Complex Mix of Organic Compounds. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

X

Xiang, Wei and Cheng, Hanlie and Cadasse, David and Rehman, Rabia (2022) Classification Method of Rock Structure and Rock Mass Quality of Surface Granite: Geological Disposal of High-Level Radioactive Waste in China. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Xiang, Zhe and Zhang, Nong and Xie, Zhengzheng and Zhang, Chenghao (2021) Deterioration of Coal Microstructure under Discontinuous Cyclic Loading Based on Nuclear Magnetic Resonance. Applied Sciences, 11 (1). p. 462. ISSN 2076-3417

Xiao, Huijuan and Mei, Linhai (2019) Dynamics and Inequalities in Energy Efficiency in China. Energy and Power Engineering, 11 (03). pp. 132-148. ISSN 1949-243X

Xie, Yibing and Pongsakornsathien, Nichakorn and Gardi, Alessandro and Sabatini, Roberto (2021) Explanation of Machine-Learning Solutions in Air-Traffic Management. Aerospace, 8 (8). p. 224. ISSN 2226-4310

Xin, Yu and Shen, Xiaojun and Liu, Huizhen and Han, Buxing (2021) Selective Utilization of N-acetyl Groups in Chitin for Transamidation of Amines. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Y

Yadava, Anil Kumar and Ahmad, Syed Aqeel (2022) Study about Classified Indian Reclaimed Asphalt Pavement (RAP): Aggregate Impact and Abrasion Value Approach. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 99-117. ISBN 978-93-5547-492-6

Yau, Yeu-Torng and Hwu, Kuo-Ing and Tai, Yu-Kun (2021) Active Clamp Boost Converter with Blanking Time Tuning Considered. Applied Sciences, 11 (2). p. 860. ISSN 2076-3417

Yuan, Wei and Yang, Renfeng and Yu, Jianyou and Han, Xiujie and Tang, Shengwen (2021) Experimental Study on Special Testing Strength Curve for Compressive Strength Evaluation by Rebound Method. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Z

Zalameda, Joseph N. and Winfree, William P. (2021) Passive Thermography Measurement of Damage Depth During Composites Load Testing. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Zhang, Xu and Shaver, Gregory M. and Lana, Carlos A. and Gosala, Dheeraj and Le, Dat and Langenderfer, David (2021) Sensor System and Observer Algorithm Co-Design For Modern Internal Combustion Engine Air Management Based on H2 Optimization. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Zhang, Yu and Chiu, Tsan-Yu and Zhang, Jin-Tao and Wang, Shu-Jie and Wang, Shu-Wen and Liu, Long-Ying and Ping, Zhi and Wang, Yong and Chen, Ao and Zhang, Wen-Wei and Chen, Tai and Wang, Yun and Shen, Yue (2021) Systematical Engineering of Synthetic Yeast for Enhanced Production of Lycopene. Bioengineering, 8 (1). p. 14. ISSN 2306-5354

Zhao, Huanyu and Zhu, Chunling and Zhao, Ning and Zhu, Chengxiang and Wang, Zhengzhi (2021) Experimental Research on the Influence of Roughness on Water Film Flow. Aerospace, 8 (8). p. 225. ISSN 2226-4310

This list was generated on Thu Nov 21 12:46:24 2024 UTC.